Random good picture Not show

(91) The round circle and pinion that have gone through heat treatment can meet operation requirement.

(92) The chemical heat treatment of ferrous PM parts, such as carbonizing , carbonitriding are reviewed.

(93) Equipment applies extensively in forging, cast, each domains such as heat treatment, mechanical hot-working, pulverous metallurgy.

(94) Composition, heat treatment state and micro - hardness test etc.

(95) The influence of melting ambience, illumination time and heat treatment temperature on photosensitive of photoactive glass ceramic were studied. The samples were analyzed by XRD and SEM.

(96) The magnetic density of weldments was detected and analyzed in different heat treatment conditions by metal magnetic memory technology.

(97) The crystallographic texture of semi-crystalline PET was investigated during cold rolling and heat treatment based on the X-ray diffractometer equipped with an area detector.

(98) The material and the method of heat treatment for roller have been discussed and the roller was made based on the corrected data.

(99) The phenomena of fracture of double rotor was observed spottily . Its fracture was compound cleavage and Intergranular fracture by LOM, SEM and heat treatment experimental instrument.

(100) To avoid the saddle-backing on the tooth root, the undercutting problem in the rough-plane process should be solved before heat treatment process.

(101) The heat treatment process parameters for producing cotton baling wire and the wires'mechanical properties are given, the results show that the properties of wires produced by the process are good.

(102) Heat Treatment: infiltration of carbon conditioning, tempering, normalizing, of Portland, blackening.

(103) Martensite - type heat - resistant steel eventually normalizing + tempering heat treatment used. Sentencedict.com

(104) The space heat treatment test of the Y-Ba-Cu oxide superconductor was first conducted in a crystal heating furnace which was carried out as piggyback on the chinese recoverable satellite.

(105) From the macrograph of the W-coating after heat treatment can see abscission of W-coating , and which deposited 5 hours is very serious.

(106) Heat treatment of pressure die casting is not possible but due to the high rate of solidification the mechanical properties are good.

(107) There are two treatment options, heat treatment or fumigation with methyl bromide.

(108) The results show that the screw breakage is due to quenching crack from improper heat treatment. The effective improvement measures to solve the problem of screw breakage are provided.

(109) It was considered the mechanism of the fracture phenomenon is the same as split-off of iron phase in non-equilibrium heat treatment.

(110) The effect of different content of silicon to the medium carbon low-alloy steel microstructure and mechanical properties was studied under different heat treatment technology.

(111) All processed cheese has its ripening process arrested at a given point by heat treatment.

(112) It is found that the technology to be used to make soap film will influence the film quality and the latter can be improved by a reasonable heat treatment.

(113) The invention provided one method to produce copper alloy with fine heat resisting and its slab and its intensity wasn't mostly decreased under the heat treatment, such as strain relief anneal.

(114) At the same time, precision molding can decrease the reject ratio of refiner plates, and optimizing the alloy and shakeout time can eliminate the need for heat treatment.

(115) The heat treatment technology of carbo - nitriding of steel has the characteristic of lower treatment temperature and direct quenching.

(116) Austenitic type stainless steel heat treatment of acid - resistant.

(117) Use of high - quality cutting tool steel, with advanced heat treatment process.

(118) There are three main operations in the heat treatment of steel: hardening, tempering and annealing.

(119) Material quality aspect , heat treatment aspect , grinding handicraft aspect the final article creation specifically for grinding crack has been chosen preventing measure from being a part rationally.

(120) The article studied some critical factors of influencing the beany flavor of fermented soymilk such as soy soaking, heat treatment, cultures, soymilk concentration, acidity, milk, sugar.